Aeration with their hands


Nowadays, artificially created reservoirs are becoming increasingly popular. They can be located both separately and as part of a landscape project, serving as its integral part and picturesque decoration of the landscape.

As a rule, such bodies of water are inhabited by various freshwater animals, which require appropriate care. The fact is that in reservoirs with stagnant water there is no proper circulation, and therefore oxygen is quickly consumed, which causes water pollution and the reservoir acquires an ugly color.

In the natural environment, nature itself organizes the necessary movement and purification of water and its saturation with oxygen, but in artificially created reservoirs with these tasks, it is impossible to do without human help and appropriate devices.

Aeration is the oxygenation of water with the help of special equipment - an aerator. Such a device contributes to a better circulation of water within the reservoir: large or small, which favorably affects the entire aquatic flora and fauna.

Table of contents: Aeration of reservoirs

The need for aeration occurs most in the summer, when the water temperature rises and, accordingly, the oxygen content also decreases in winter, when the water freezes.

Pond aeration provides: removal of excess amounts of various gases, creating normal conditions for living organisms; minimal silting of the reservoir, which has a beneficial effect on its inhabitants; optimal circulation of water and the production of the necessary amount of oxygen.

Currently, a water compressor is most often used in conjunction with other devices, for example, filters, skimmers, pumps, cleaning devices.

There are many types and types of various devices for the enrichment of water with oxygen. Depending on the operating conditions, design features and principle of operation, a tubular or disk aerator is used.

The submersible tubular aerator will be more relevant for ponds where fish is found.

Specialist's recommendation: in addition to aeration, in order to maintain the normal state of the biosystem, one should not forget about some plants, for example, a roepole, which is also able to release enough oxygen. Making a device for the pond do it yourself

Speaking about creating an aerator for a pond with your own hands, you should understand what it means the acquisition of several devices, combined in such a way that they can perform a given function.

It is possible to make several variants of aerators, which will differ in the principle of operation and performance. The final choice will be determined by the volume of the reservoir and the presence of certain types of living creatures in it.

Fountain. For the decoration of the base can approach any water-resistant object: a vase, pot, slide, etc. When choosing a pump, its productive qualities should be taken into account: a weak one cannot cope with large volume, a strong one can produce a jet instead of a fountain. It is rather an option for a small artificial pond in the garden.

Floating. The basis is taken submersible pump of small capacity.

It is fixed on the base of lightweight material, for example, plastic, mounting foam, etc.

For the optimum height of the jet, the outlet must be equipped with a spray and an adapter. It is practically a mobile, periodically functioning fountain.

Vetrovik. Such a device (unlike the finished version) is not equipped with a compressor.

Wind energy is transmitted to the blades located in the water.

Here comes to the forefront functionality, rather than aesthetics.

Such a device consists of a moving shaft (its length will depend on the depth of the reservoir), blades (upper and lower).

Submersible. In this case, the standard autocompressor is taken as the basis.

Additionally purchased: feed hose; pipe with perforation and plug (a kind of membrane); sprayer (if necessary).

The compressor itself should be located above the water level, and the hose at the bottom.

Water pump. This is the bottom version of the aerator. It is advisable to place the device in a special room, and place only a spray in the water. At the same time it should be below the water level and not less than 15 centimeters from the bottom.

We offer you to watch a video in which an experienced user explains how to make a do-it-yourself aerator for the pond: Finished appliances

Thus, the choice of a specific aeration device should be guided by two main components: the volume of the reservoir and oxygen saturation rates.

Currently available low-noise devices of small dimensions, capable of delivering relatively high power.

As a rule, aerators are designed for a long period of operation, so they use durable energy-saving elements.

Through the use of compressors, it is possible to obtain the optimum temperature balance of the reservoir, which has a beneficial effect on its entire flora and fauna, as well as prevents flowering and accumulation of bottom sediments. Aquarium compressor

The aerator for the aquarium is no less necessary than for a pond of any area.

Indeed, with a relatively small number of plants, the water in the aquarium is not saturated with oxygen in sufficient volume.

And as a result of the vital activity of various aquarium organisms, a lot of carbon dioxide is released into the water. In this case, the aerator is simply necessary.

A standard compressor consists of a hose, a pump and a sprayer. The smallest air bubbles are distributed in the water. The principle here is that the smaller they are and at the same time there are many of them, the better.

Among the main functions of aeration aquarium are the following:

Today, many companies offer various types of compressors, where the power of the device is directly depends on the volume of the aquarium.

The price here will depend on the model of the aerator, its variety, performance, additional functions and other components.

For residential premises, a noiseless compressor will be most relevant, due to the rather widespread location of the aquarium in the rest area, where extra noise is completely unnecessary.

The compressor filter besides the main functions also purifies water. A fairly common option is a combined aerator in which there are fewer different parts, which also improves the design of the aquarium.

Air is pumped here by immersion nebulizers , the main advantages of which are the absence of noise, different vibrations and the absence of the need for frequent flushing.

The depth of location will depend on the model of the aerator.

The aquarium in which the backlit aerator is installed will look especially impressive. The dwelling for fishes will be filled with very beautiful multi-colored bubbles. How to do it yourself

This device works on the principle of air accumulation and its gradual supply to the aquarium. In this case, air can accumulate in a specific tank.

Thus, in order to make the aquarium compressor yourself, you will need the following items: rubber tank (as an air battery); pump (you can use car, bicycle, etc.); tee (faucet three-way); plastic base - a tube (an ordinary dropper with a clip is ideal).

Assembly of the aerator consists of the following steps:

Among the drawbacks of this device is the need to periodically inflate the tank. For an aquarium with a volume of up to one hundred liters, this will need to be done about two times a day. Naturally, the compressor must be monitored.

Please note: is most relevantAeration of the aquarium at night, since photosynthesis is carried out in the daytime, and at night there may be a situation when carbon dioxide will be formed in excess. Mixing layers with aeration is just as important for equalizing the temperature of the water. This removes the film that forms on the surface and prevents gas exchange. Aeration of the aquarium also needs to be supported by a special flora.

Watch an interesting video, which shows in detail all the steps of making an aerator for an aquarium with your own hands:


Related news:


The drawer under the bathroom own hands
Rattan furniture with his own hands video
Sliding Desk with his hands video

ReCache | DelPage
Memory used: 53.02KB of 768KB
Render time: 0.002 sec