Finish basement siding with their hands

Natural and important human need is living in a cozy and beautifully decorated room. You can satisfy it with a quality repair, which includes finishing the balcony with laminate.

This material is used as a floor covering for various rooms. Can I use it as a finishing material on the walls of the balcony?

Content Requirements for covering the balcony moisture-proof laminate The moisture-proof laminate will last longer, thanks water repellent

Finishing of such a room differs in its specificity from others: The material must be resistant to deformation during operation. For the preservation of its original color and appearance, it is necessary to maintain a temperature in the room that will not fall below + 5 ° C. To fulfill this condition, it must be insulated and glazed, preferably with double-glazed windows. Use laminate on the loggia is better moisture resistant, so that when exposed to high humidity, it does not swell. The only option for this is a coating having a base of plastic. Do not use rigid fasteners, so that with slight variations in size, no cracks will appear. Fasteners for panels positioned past the locks of the laminate. Pros and cons of using laminate on the balcony

laminate on the floor Laminate strips are a multi-layer material that has a different basis. It is made of wood or plastic. Its positive properties include: simple installation that even a beginner can handle; a wide range of textures and colors that imitate marble, wood and tile; high resistance to mechanical shock; moisture and heat resistance, thanks to which the material can be used both in summer and in winter without fear of damage (this applies to class 33); hygiene (fungus and mold do not breed on the surface); ease of care (enough to wipe periodically with a damp cloth).

laminate classes Laminate classification

The disadvantages of this material are: With increased humidity, the constituent cellulose can be discharged; has a rather heavy weight that can make it difficult to work when mounted on a wall; before laying should be pre-crate. Installation methods

To fix the laminate on the balcony in several ways: on the adhesive mixture; on the crates made of wood; on the welded metal crate of aluminum strips. methods of installation the principle of adhesive-free installation of laminate

The easiest is glue mounting.

Laminate is fixed in this case, as a rule, only on the surface of plasterboard.

But at the same time we must not forget that the gypsum sheets react negatively to high humidity, in this connection it is advisable to carry out their pre-treatment with water-repellent compositions.

To be completely convinced of the positive outcome for the strength of the surface, drywall sheets should be attached to the wall with dowels or long screws. laminate on the balcony Before installing the panels, the grooves are glueed

Laminate is pre-connected with special locks, forming ready-made strips of wood. Before you fasten them, you need to groove the slats with a sealant or glue to increase moisture resistance.

Then apply the same adhesive to the base and then install a connected board on it. The grooves on the board gently start in the spike and lightly hammer down. Crate made of wood

lathing for laminate To begin with, prepare bars, the length of which should be equal to the distance from the floor to the ceiling. In advance, all wooden products should be treated with an antiseptic, which will protect the material from fungal damage.

Fastening should be carried out across wall surface at a distance of 40 to 50 cm from each other. The slats will be attached to these slats. Metal frame Metal frame To save money, you can buy more thin profile

This work is performed on the same principle as the crate made of wood, only from galvanized profiles. Beacons for alignment will serve as stripes installed along the edges.

These methods are suitable for mounting slats that are planned to be laid vertically. If the lining of the balcony laminate will be made horizontally, then the intermediate bars should be fixed along the wall, and the upper products - in height.

The skeleton of the profile is an expensive method, but the finances spent are fully justified, the more the service life of the whole structure increases. To save money, you can apply a thinner profile, but with sufficient strength.

Whichever option is chosen, it is important to remember that the correct installation and a qualitatively aligned plane are the key to success and durability of the finish. Laying laminate on the ceiling Laying the laminate on the ceiling Crate on the ceiling parallel to the ceiling

In order to properly sheathe the balcony with laminate, you must start the trim from the ceiling. The crate is ready, the lamellas should be laid perpendicular to the window.

This way you can visually expand the room. The only thing that can be difficult is to fit the protrusions and corners. In order to perform further all the work it is necessary to follow the recommendations: Measure the bar to be installed. Cut off the excess part with a jigsaw or saw. It is important to choose the right tooth path on the tool so that no notches form. At the edge of the strap, trim the spike to facilitate fitting to the surface. Fix the bar with klyaymer, screws or put on the glue. If the mount is selected by the first method, then an element that has a sharp edge without a spike should be firmly fixed. On one board, having a length of 1 m, you will need about 3 fasteners. ceiling laminate Cut the next strip in size, if the crate is made with high quality. You can immediately cut the required number of strips and complete installation. To attach the last board, you should cut the edge in width, and insert the clamps with teeth into the end. Then install it in place in specially made holes and fix with screws. It is important to leave a small gap of 10-15 mm from the wall. This is necessary for the base laminate, which has the property to deform under the influence of high humidity. Laminate wall decoration

walls with laminate After you finish the installation of the ceiling, you can begin to finish the walls. The fastener method is practically no different from the previous one. Only in this case it will not be necessary to cut the lock. It is necessary to advance in the installation, in such a way that the whole strips are located near the openings, and which need to be cut - to the corners.

Experts recommend starting the process from the far left corner and moving clockwise.

If a paralleling method was chosen, then it is important to ensure that the joints of several rows fall on wooden slats. So it will be possible to secure the strap qualitatively and not allow the deflection at the junction. Details of the process of laying laminate on the wall, see this video:

In order to facilitate the fitting of parts, installation is recommended from the top down. To maintain the optimum clearance, it is advisable to use special wedges.

laminate to wall To evenly distribute the laminate, you must first calculate the total length of the surface to be covered and in the case of obtaining a non-integral "tile", evenly move the intermediate material, and fill in the remnants with equal pieces.

The slopes can be closed with the help of long lanes, which first must be cut to size. To simplify installation, you can pre-“put” on the glue. The final step is the installation of baseboards and decorative corners. Floor leveling techniques

Floor leveling methods High-quality leveling of the floor surface on the loggia is the key to long-term operation of the finished structure. This stage is important to follow the rules, observing technology. There are several options: manufacture of cement-sand mixture; use of ready-made self-leveling compound; using the install lag.

An additional stage of floor warming can be performed with the help of expanded clay, having average fractions, or extrusion of expanded polystyrene can be used. For information on how to level the floor without beacons, see this video:

The base, made of cement-sand mixture, can be produced as follows: lay on the surface of a waterproofing film having a thickness of not less than 200 microns; it is necessary to lay it overlapping and fasten the joints with duct tape; over this layer put a special substrate for laminate made of cork material or polyethylene foam; place the cover panels, starting from the farthest corner on the balcony; to process joints with sealant.

floor on logs Installation of laminate on logs should be done in the following sequence: lay on the level of lags on the surface; plywood or chipboard sheets should be placed on them; plywood must be cut into small strips and put at a distance of 5 - 8 mm from each other in order to prevent the base from deforming during operation; it is better to lay strips of material in a checkerboard pattern; after that you can proceed to the installation of laminate panels.

It is mandatory among the preparatory work must be warming and waterproofing. For their implementation, it is advisable to use foam, penofol or other materials that are designed to perform such processes. Laying options Layout of the laminate Panel laying methods

The location of the laminate can be produced by several methods: parallel to the window; across the base; diagonally; herringbone method; in the form of a "square".

Convenient is considered transverse installation, which allows to avoid complex end connections. Also, this method increases the speed of work. The finishing works are the installation of decorative elements, such as baseboards and thresholds. These details give a neat appearance and also protect the floor from moisture penetration. For details on how to lay laminate or solid wood on the floor, see this video:

After the installation is completed, you can admire a cozy place that will allow you to enjoy the sun during the holidays and get a positive charge for the whole day.

Similar articles:

Related news:

The Crocus paper with their hands master class
Making boxes with their hands
How to make windows service
To make an evening hairstyle with their hands
How to make cashing door