How to make a bottle of bee


I’ve mentioned that I’ve been reading for some time.

Recently, I made a couple of photographs along the way to illustrate the process. Let’s dig in! Beer Brewing Equipment

If you are a woman, he will always be able to make it.

IMG_0031

These supplies are available at any home brewing store.

It makes it quite easy. You can simply put your beer on it, you can put it on. If you’re ready to drink, you’re ready to drink.

Brewers for long-term storage. If you’re the case, you’ll need to bottle it up.

This equipment, all together, will cost $ 20 or so and are often available in kits.

When making beer, I use a few optional items:

Some optional equipment

The large glass jug is called a carboy. You can use it - it doesn’t last too long in the bucket. Also, I’m using an auto-siphon (which makes it out for the carboy) and a bottling tip. You can also want to make a hydrometer.

You don’t need to make it easier in some ways. It is a much easier process with the auto-siphon and the bottling tip.

You can’t already find your kitchen. You’ll need a small pot of liquid or gallons of liquid, or a thermometer, or a funnel (if you’re using a carboy). If necessary, you need to clean up as much as possible. How to Make Beer

As I mentioned earlier, I planned to make a porter. I found an interesting recipe on the internet:

6 pounds plain amber malt extract
8 ounces crushed crystal malt (60 L)
4 ounces crushed chocolate malt
4 ounces crushed black patent malt
1 ounce cluster hops (bittering)
1/2 ounce Williamette hops (finishing)

It is a grain steaming bag (for example, a teabag for a cold water), a priming sugar, a yeast, and a caps.

Ingredients

All of these items are available at a beermaking supply store. Purchased at $ 35.

If you want to make it, you can experiment with it. For example, I’ve made an oatmeal stout that went out on the recipe. Boil the Water and Steep

Most beer making recipes follow a pretty standard procedure. If necessary, it can be used to reduce the amount of heat. or so.

The "tea bag"

Above, I took the picture just after dropping the “tea bag” into the water. Color, usually to some shade of brown. Here's what it looks like after the steeping.

Brewing beer Adding Malt

Once the steeping is finished, you’ll simply bring it up. If you’re stirring it regularly, then you’ll drop it in the mix. Once it’s finished boiling (it’s now called “wort”), you’ll need it. If you don’t have a carboy, then I’ll pour it into the carboy. I then drop in the yeast, stir it up a bit, then put it on. The picture is on.

Full carboy Wait Two Weeks!

Then you wait. Usually, you’ll wait for roughly two weeks. Bubble bubbles coming through the bubbler. Watch it for a minute - wait for three minutes and you’re ready to finish it up. Finishing

If you’re ready to finish it, then you’re ready to finish it. If you’re not going to bottle it? Bottling

Bottling is similarly easy. You must be able to clean the bottle and put it on the bottle with a capping tool. ). It’s ready to drink. Is This Cost Effective?

The $ 64,000 question, indeed. Is it a cost effective hobby when compared to some beverages?

If you’re comparing to the cost of a well-made craft, it’s actually quite cost effective. In the above example, I used seven packs of porter, a $ 5 per six pack. If you make many batches, it doesn’t include any cost. Fillian’s London Porter, which cost $ 8.99 for a six pack, homebrewing store.

If you’re looking for more than $ 10 per 24 pack, you can’t find More cost effective than such beer. Admittedly, recipes for the mainstream beers are less expensive than the recipes.

So you are replacing with your homebrew? If you’re replacing your own homemade beer, you’ll be replacing it. However, if you’re not content, you’lln’t be able to save money.


Related news:


How to make a skateboard
Baskets recipe with photos step by step
How to make Escher's waterfall
How to make the accompaniment
Crafts with their hands out of paper for kids
How to do sandblasting with his hands video
Antenna with their hands

ReCache | DelPage
Memory used: 45.46KB of 768KB
Render time: 0.030 sec