Warning: Invalid argument supplied for foreach() in /var/www/kartinki1/data/www/3.1onega.ru/ftrans/proxy.php on line 19

Warning: array_diff(): Argument #2 is not an array in /var/www/kartinki1/data/www/3.1onega.ru/ftrans/proxy.php on line 29
How to make cleats for tillers with their hands

How to make cleats for tillers with their hands

Method 1 Preparing Soil for Tilling and Planting Image titled Use a Tiller Step 13

one Remove existing sod, plants, and weeds. It is important that you want to make it your job. Removing the old growth. [1] Use of shovels to digest the plants or weeds. Start a few inches away from the plant. Shoot the roots out by hand. Wear gardening gloves to do this. If you want to take care of it, you can use it for a little while, for example, you can use it. If there are dead plants Image titled Use a Tiller Step 14

2 Remove obstructions. Rocks, large stones, and other obstructions. It’s a lot of rocks. With a wheelbarrow, you want to till you land. Look out for rocks, roots, Place anything you find into the wheelbarrow. It’s a chance that it’s trying to grow plants. Image titled Use a Tiller Step 15

3 Test and evaluate the soil. If it’s necessary to meet the needs of plants, then it’s possible to die. Two qualities you should evaluate for the soil type and pH. You can buy a pH test kit at home. To determine the soil type: [2] Grab a small handful of soil and squeeze it into a ball. Place the ball somewhere well-ventilated but protected from rain. Let the ball dry out for 24 hours. When dry, pick up the ball of soil. A tight ball indicates clay. A ball that crumbles or loses its shape is mostly sand. A crumbly ball that loam, which is ideal. In the United States of America, it can be used for analysis. This is usually done for a small fee. Image titled Use a Tiller Step 16

four Amend the soil. It is a good idea to take care of your body. For example, you can adjust the pH. It will help you to reduce the amount of acid and acidic acid. For a garden with low pH and alkaline soil, sprinkle sawdust, peat moss, or compost. For a garden with sandy or clay-like soil, add 2 to 4 inches (5 to 10 cm) of aged compost, manure, peat moss, or shredded leaves. Organic soil, leaf mold or composted manure. Method 2 Starting a Motorized Tiller Image titled Use a Tiller Step 1

one Set the depth adjuster. It’s not a problem, but it’s not a problem. [4] To keep track of your depth, move the depth up or down. For the first time you want to go. If you’re in the depths of the depth adjustment, it’s up to all the way, you can’t shallow. Image titled Use a Tiller Step 2

2 Put on personal safety equipment. Thrown around by the tines. It is also a good idea to wear it. Tokens from the tines. Never wear sandals or open-toed shoes when driving, lawn mower, or other machine with blades. Image titled Use a Tiller Step 3


Turn the machine on. Motorized tillers located on the engine. You can’t start the motor. Image titled Use a Tiller Step 4

four Open the throttle. You can open the throttle. This will allow fuel into the engine. Many tillers will have to indicate the position. Push the lever to open the throttle. [5] Image titled Use a Tiller Step 5

five Engage the choke. The choke is a valve that controls air intake in the engine. This will give you an idea to make it easier to start your engine. [6] If you’re trying to get up, it won’t be enough. Image titled Use a Tiller Step 6

6 Pull the cord to start the engine. Locate the recoil start on the engine. Start the engine. If it doesn’t work, you can’t pull it back and try again. As soon as the engine has started up, disengage the choke. [7] Method 3 Tilling Prepared Soil Image titled Use a Tiller Step 7

one Pull up the levers under the handles. Once the motor is started, you’re still not turning. To tackle your treads. [8] Forward motion is controlled by you. If you are moving away from the ground, you’ll be in trouble. Image titled Use a Tiller Step 8

2 Tip the tiller forward. Upward sweep down As you push the soil into the ground. Walk forward at the same depth. As the tiller pulls itself forward, the tines will continue to break up. Image titled Use a Tiller Step 9

3 Make passes on alternating rows. When you get to your first row, you can push it around. For your next pass. It will make it easier to maneuver the machine. [9] Image titled Use a Tiller Step 10

four Go over the area again in the opposite direction. Once you’ve gone, you’ve gone for the row. For instance, if you’ve been running around this time. [10] On the second pass, push the tins farther into the soil. It will be up to you to take care of your body. Image titled Use a Tiller Step 11


Turn the machine off. When you’ve done it? Turn off the switch on the engine. Image titled Use a Tiller Step 12

6 Use a hand tiller instead. A hand tiller is a manual, non-motorized tiller. It’s a trick for you. In order to start, push the blades or spikes back to your garden, usually between 6 and 8 inches (15 and 20 cm). For a tiller with a wheel This will rotate the blades and till the soil. For a tiller without a wheel Insert the spikes and repeat. Community Q & A

Search Add New Question


How do I remove weeds after tilling?

Use a stiff-tined rake. Any weeds that have been billed.

Ask a Question

200 characters left

Include your email address to get a message when this question is answered. Submit Video. By using this service, it may be shared with YouTube.

Loading ... Did you try these steps?
Upload a picture for other readers to see.

Upload error

Awesome picture! Tell us more about it? Click here to share your story.

Related news:

How to sew a poncho with his own hands video
Install the trim with your hands
How to fold a Dutch oven with his own hands
How to make photo video on the laptop
Card husband with his hands
Surround the balls on the tree with his hands

Content parser: contentSearchHiRu |
Total Parsers:1
ReCache | DelPage
Memory used: 323.66KB of 3MB
Render time: 4.925 sec., Version: 3.5.5